Compact Hideaway UHF CB Radio Pack inc 3dBi & 6dBi Antennas
Compact 80 Channel UHF CB radio with CBA3F1L 6Dbi UHF Antenna with Elevated Feed & Spring Base & 3dBi 15cm Whip Antenna
The Crystal Mobile DB477D 5W compact in-car UHF CB radio with remote speaker/microphone has been designed in Australia for Australian Conditions.
The display, speaker and control buttons are conveniently located in the handpiece and with the included 2m extension cable you can easily hide the main unit away under your dashboard or seat.
The unit features a full aluminium die cast chassis, 80 narrow band channels, large multi colour display and all the other features you would expect from a UHF.
Specifications:
- Full Aluminium Diecast Chassis
- 5 Watt Power Output
- 80 Narrow Band Channels
- Large Multicolour Controls and Display (7 colours)
- Duplex Range Extension
- Mute Out (Capable of muting car stereo when receiving)
- Channel Scanning
- Automatic Squelch Control
- Remote Speaker/Microphone with built-in Large LCD Display
- CTCSS Codes
- External Speaker Ouput
- Roger Beep
- Call Tone
Warranty:
3 Year Warranty
Whats Included:
- 1x DB477D UHF Radio
- 1x DB477D Remote Speaker/Microphone Handpiece
- 1x Handpiece Mounting Bracket (with mounting hardware)
- 1x Mounting Bracket (with mounting hardware)
- 1.2M Power Cable (attached to main unit) (with in-line fuse holder)
- 2x 2AMP AGC fuses (1 in fuse holder, 1 spare)
- 1x 2M Handpiece Extension Cable
- 1x 2M Handpiece Extension Cable Joiner
- 1x User Manual
CBA3F1L 6Dbi UHF Antenna with Elevated Feed & Spring Base.
Our New UHF CB Radio antennas are all now made with 100% Stainless steel Spring and body construction making them suitable for all the harsh conditions that the australian environment can throw at them. All antennas are pre tuned to a standard of a VSWR or 1:1.15 or better.
Aerpro CBA3F1L UHF antenna kit features a high-quality elevated feed and heavy-duty spring base combined with a 6dBi flexible mast giving great UHF reception. With 5 meters of low-loss RG58 coaxial cable fitted and pre-wired with PL259 connector the CBA3F1L is ready to go straight from the pack.
The CBA3F1L is suitable for use in various situations including slightly hilly country, open highways or urban use and can be mounted on vehicle bull bars and guards using Aerpro UHF antenna mounting brackets.
Specs:
UHF CB Radio Antenna 3dBi 15cm Whip
Our New UHF CB Radio antennas are all now made with 100% Stainless steel Spring and body construction making them suitable for all the harsh conditions that the australian environment can throw at them. All antennas are pre tuned to a standard of a VSWR or 1:1.15 or better.
Features:
- 100% Stainless steel body construction
- Suitable for the harsh Australian conditions
- 477MHz Frequency
- 3dBi 15cm Whip aerial
- Replacement aerial suitable for Aerpro elevated feed aerial
- Pre-tuned to a standard of a VSWR or 1:1.15 or better
Specs:
- Frequency: 477MHZ
- Length: 15cm
- Gain: 3 dBi
- 1/4" thread
| Frequency range |
RX: 476.4250 ~ 477.4125MHz, TX: 476.4250 ~ 477.4125MHz
|
| Number of channels |
Max. 80
|
| Operation mode |
8K5φF3E
|
| Channel spacing |
12.5kHz
|
| Antenna impendance |
50Ω
|
| Working temperature |
–20℃ ~ 60℃
|
| Power supply |
13.8V DC±15% (11.7~15.8V)
|
| Grounding method |
Negative ground
|
| Current drain |
Less than 150mA on standby, less than 350mA on receive, less than 1.5A on transmit
|
| Frequency stability |
±2.5ppm
|
| Dimensions |
(W x H x D) 112 x 30 x 155 mm (Dimensions are including protrusions)
|
| Weight |
Approx. 0.8kg (including microphone)
|
| Transmitter RF power output |
5Watts
|
| Spurious and harmonics |
60dB
|
| Adjacent channel power |
60dB
|
| FM noise |
40 dB
|
| Audio distortion |
Less than 5%
|
| Receiver Sensitivity EIA 12dB SINAD |
0.28μV
|
| Adjacent channel selectivity |
60dB
|
| Intermodulation |
60dB
|
| Audio output impendance |
8Ω
|
| Audio output at 8Ω |
0.5W or higher (10% distortion)
|
About Crystal Mobile
As an Australian owned and operated company, with over 30 years experience in the Electronic and Automotive Aftermarket Industry, we strive to push the boundaries of the norm, the status quo. Our aim is to provide you with the very latest and innovative communication technologies based on local Australian needs with bullet proof reliability and performance. Our in-house team of engineers including mechanical and industrial designers have teamed up with our overseas manufacturing engineers to develop the range to match a broad spectrum of customer needs while staying focused on performance and reliability. From basic hand-held CB radios that even the kids can use to fully professional units for commercial use, our range is unique. Our Crystal Mobile Radios have not only been tested by our own staff and local enthusiasts, they have also been scrutinised and tested by the Australian Communications and Media Authority (ACMA) themselves. They not only comply with but in fact most exceed all relevant Australian standards. So if you are looking for a well designed, quality product at a price that represents unmatched value… the answer is clearly Crystal Mobile.
More info
