Redarc KOLO12DUO 12V Daytime Running Lights Controller


More info.

Make 4 interest-free payments of $49.75

Sold Out

Calculate Shipping

1 x Redarc KOLO12DUO 12V Daytime Running Lights Controller delivered to , AU

Collect from our Bayswater VIC Store - $0.00
We will call when item is ready for Pick Up

Redarc KOLO12DUO 12V Daytime Running Lights Controller

The REDARC 12V Daytime Running Lights Controller with override option is designed to ensure vehicle headlights are switched on whenever the ignition is on.

REDARC daytime running light modules are designed as a safety feature for commercial, industrial and fleet vehicles but are also suitable for the everyday driver. Daytime running light modules ensure that the headlights on your vehicle are on at any time the vehicle is operated.

Recent research suggests that having headlights on during the day increases the visibility of your vehicle and, as such, provides safer driving conditions.

REDARC daytime running light modules are now compulsory as OH&S provisions on many mine sites.

They are designed for universal fitment in 12 volt or 24 volt vehicles with either positive or negative-switched lighting systems.

REDARC daytime running lights feature a 10 second turn on delay designed to reduce the load on the engine during cranking. This is particularly useful on vehicles with an already-large starting load such as Landcruiser 100 and 200 series turbo diesel models.


  • Designed for universal fitment
  • Turn on delay to reduce cranking load


  • Increases road safety by making vehicles more visible
  • Cost-effective protection for fleet vehicles

Take it as red!

The 4WD Shed is an Authorized Online Reseller for Redarc.

We also fit Redarc products in our mechanical workshop in Bayswater, Vic. Additional Costs May Apply

Input (Operating) Voltage 10 - 15VDC
Warranty 2 Years
Length (mm) 90
Width (mm) 70
Height (mm) 32
Weight (kg) 0.4

When installing a LED as an indicator or warning lamp, extra care must be taken.

LED lamps, unlike traditional filament (or incandescent) lamps must be connected with the right polarity (positive and negative must be connected the right way around).

A LED has "ANODE" and "CATHODE" connections. Most LEDs have the CATHODE identified by one or more of the ways shown in the diagram.

A LED must not be connected directly to 12V (or 24V), it must have a resistor in series. Usually 1KΩ (1,000 ohms) or 560Ω is suitable for a normal LED indicator on 12V, but a proportionally higher value of resistance must be used for higher voltages.


Brand Redarc
Shipping Weight 0.4000kg

More From This Category