Superior Outback Tourer™ Australian Wide Legal Weld In Coil Conversion Dual Cab
Comes with 2, 3, 4 or 5" Lift, 33-37" Tyres, Track Correction & 3.85T (5") or 4T (2-3") GVM for Toyota Landcruiser 79 Series Gen 2 VSC Dual Cab
ONLY AVAILABLE FOR PRE REGISTRATION VEHICLES IN VICTORIA. DUE TO RECENT CHANGES TO VICTORIAN LEGISLATION POST REGO VEHICLES CAN NO LONGER BE FITTED WITH THE OUTBACK TOURER KIT.
Superior Engineering is the only manufacturer in Australia who can legally supply a lift kit that offers a true 33-37” tyre option on 16”, 17” or 18” rims with a combination from +0 to Neg 12 offset in the rims, Superior 4 link coil conversion in either a 3.85T or a 4T GVM upgrade and we also upgrade the rear track width to match the front.
Another key factor in choosing this kit is it can also legally use either Radius arms, Superflex arms or Hyperflex arms meaning you will have the biggest, meanest 79 driving around legally throughout Australia.
Unlike other manufacturers who supply diffs then make you pay more for good axles we supply as standard the worlds toughest RCV 300M axles built in the USA just for Superior Engineering, these axles offer a lifetime warranty against failure and they retail for over $3000 per pair at no extra cost when purchasing a complete suspension kit.
The Ultimate diff housing starts with 4140 Chromoly 13.5mm wall housing tubes that are ~900Mpa average Yield Strength where our competition uses ~6mm wall carbon hollow bar that is ~470Mpa, meaning just in the tubes alone a Superior Engineering housing is almost double the strength over our competitors. FEA tests were completed with 15-tonne load on the rear axle, and even then they only showed a deflection in the housing of less than 1mm, no other brand Landcruiser housing comes close!
* Dual Cab Only. If you have a Single Cab you will require the Weld In kit.
Fully Fitted & Approved at The 4WD Shed
FEATURES & HIGHLIGHTS
- Street Legal & Compliant, Approval Under SSM
- Weld-In Kit Featuring 4 x Chassis Side Strengthening Braces
- Heavy Duty Sway bar & Coil Tower Brace
- RCV 300M Axles
- Uses Factory Mounting Locations For A Precise Fit
- Supplied Pre-Fabricated For An Easy Installation
- Improved Roll Axis For Tyre Clearance
- Increased Wheel Travel & Articulation
- Adjustable Upper Control Arms
- 40mm OD Fixed Lower Control Arms
- Reduced Bush Bind Over A 5-Link
- Compatible with Coil Air Bags
- 4-Link Rear Suspension Setup
- Fully Adjustable Pinion Angle
- Provides More Precise Handling
- Improved Comfort & Ride
- 350 Grade Steel Mounts
- Supplied with Sway Bar
- Geometry will work on up to 5” lift
- Superior Engineering Track Corrected Chromoly Diamond Diff Housing
- Side Chassis Brace
- Sway Bar Kit
- Upper Control Arm Mounts (Diff and Chassis)
- Lower Control Arm Fixed Pins
- Lower Control Arm/Shock Mount
- Coil Tower/Bracing
- Lower Coil Mounts
- Upper Adjustable Control Arms
- Lower Control Arms
- Handbrake Relocation Brackets
- All Required Bolts and Fasteners
- Superior Engineering Track Corrected Chromoly Diamond Diff Housing - Lifetime warranty against bending
- RCV 300M Axles
- Front Coil Springs
- Rear Coil Springs
- Superior Engineering Radius/Superflex/Hyperflex Arms - Lifetime warranty against bending
- Superior Engineering Front Panhard Rod
- Front Superior Remote Reservoir Shocks
- Rear Superior Remote Reservoir Shocks
- Superior Engineering Remote Reservoir Mounts
- Superior Engineering Upgraded Dual Diaphragm Brake Booster
- Superior Engineering Handbrake Upgrade
- Superior Engineering Comp Spec Drag Link - Lifetime warranty against bending
- Superior Engineering Comp Spec Tie Rod - Lifetime warranty against bending
- Front Braided Brake Lines
- Rear Braided Brake Lines
- Superior IFP Steering Damper
- Legendex Exhaust
- Uneek 4x4 Bull Bar
- Superior Front Guard Flares
- Legal Australia Wide!
Please Note on 5" Kits : Although the 5" kit is an Superior Outback Tourer it must be fitted with the approved styles of Bullbar and Flares provided as part of the package. There is no exceptions with the bullbar or flares as these are needed to comply to the relevant ADR’s This means no other brand bullbar can be fitted at anytime even after registration as the headlight-bullbar fitment is a mandatory part of these SSM approvals.
Now Available - Upgrade to Superior 2.5" Compression & Rebound Adjustable Shocks (additional $1740)
The 4WD Shed is an Authorized Stockist for Superior Engineering.
Outback Kit Pricing is subject to change. Please contact us for a written quote. Kits are order in & potential wait times may occur. We will discuss all lead times & will work with both you & your dealership as required.
SSM Facility No : P17773