Superior Weld in Coil Conversion Kits Ford Ranger PX1 PX2 PX3 & Mazda BT50


Buying Options

Quantity Image Name Price
Coil Conversion 2" Lift Ford Ranger PX1 PX2 PX3 & Mazda BT50 Coil Conversion 2" Lift Ford Ranger PX1 PX2 PX3 & Mazda BT50
Base Kit Excludes Shocks & Coils
$6,280.00
In stock
Coil Conversion with Nitro Gas Shocks Ford Ranger PX1 PX2 PX3 & Mazda BT50 Coil Conversion with Nitro Gas Shocks Ford Ranger PX1 PX2 PX3 & Mazda BT50
Rear Only Kit (ESC Models)
$7,114.00
In stock
Coil Conversion with Nitro Gas Shocks Ford Ranger PX1 PX2 PX3 & Mazda BT50 Coil Conversion with Nitro Gas Shocks Ford Ranger PX1 PX2 PX3 & Mazda BT50
Full Front & Rear Kit (ESC Models)
$8,114.00
In stock
Coil Conversion with Remote Reservoir Shocks Ford Ranger PX1 PX2 PX3 & Mazda BT50 Coil Conversion with Remote Reservoir Shocks Ford Ranger PX1 PX2 PX3 & Mazda BT50
Full Front & Rear Kit (ESC Models)
$10,160.00
In stock

Coil Conversion Weld in Kit - Ford Ranger PX1 PX2 PX3 & Mazda BT50 UP UR (ESC Models)

Exhaust System Note: Exhaust System modifications are not included in this price. The exhaust will need to be modified from the rear control arm mount back. The cost of this will be added to your final cost.

Note: Superior Engineering highly recommends the use of an EPRS rust prevention unit when fitting any weld on chassis components. The Use of Electronic Rust Prevention can assist in the prevention of rust formation. Superior recommends using an 8 Coupler system for most vehicles, please see the related products tab above.

NOTE: Standard Offset Wheels can not be used with this conversion.

Convert your leaf sprung Ford Ranger PXI PXII PXIII or Mazda BT-50 to a more compliant ride and better handling both on and offroad with one of our Superior Engineering Coil Conversion Kits, designed, tested and manufactured in Brisbane to suit all Australian conditions.

This kit is supplied with everything you needed to convert your vehicle from leaves to coils, except coils & shocks, this allows you to run your choice of coils & shocks.

It still includes all other required parts such as all brackets, mounts, control arms and swaybar as well.
The NCOP VSB pre-approval paperwork is also supplied, so you can legally have the Coil suspension fitted and approved on your vehicle.

The Superior Engineering Weld-In coil conversion design was chosen to provide a more robust and longer lasting solution for the popular Ford Ranger.

​LESS Expense, Less Maintenance and improved chassis strength is why welding is the preferred method of the conversion. Who would want to drive to the cape over corrugated tracks and have to stop to check if your rear suspension is still bolted in all the time?

Once you drive on a coil rear Ranger or BT-50 you won’t ever want to go back to leaf sprung suspension! Do your spine a favour, and get the Superior Engineering Weld-In Coil Suspension.

Superior Engineering have developed this kit having done all the hard work and testing as well as performing accredited lane change tests and the Design pre-approval under the VSB LS Codes.

Once this coil conversion is fitted the vehicle we will present the vehicle to our qualified engineer who will inspect that the vehicle has the suspension fitted in accordance with Superior Engineering specifications & all legal requirements . We will then plate the vehicle with the approval code.

As with all modification and aftermarket accessories, it is recommended to confirm all modifications in writing with your insurance company as some policies or providers may not accept such modifications although street legal.

FEATURES & HIGHLIGHTS

  • Street Legal & Compliant, Approval Under VSB LS Codes
  • Weld-In Kit Featuring 4 x Chassis Side Strengthening Braces
  • Heavy Duty Coil Tower Brace
  • Uses Factory Mounting Locations For A Precise Fit
  • Supplied Pre-Fabricated For An Easy Installation
  • Improved Roll Axis For Tyre Clearance
  • Increased Wheel Travel & Articulation
  • Adjustable Upper Control Arms
  • 40mm OD Fixed Lower Control Arms
  • Adjustable Heavy Duty Panhard Included
  • Compatible with Coil Air Bags
  • 5-Link Rear Suspension Setup
  • Fully Adjustable Pinion Angle
  • Provides More Precise Handling
  • Improved Comfort & Ride
  • 350 Grade Steel Mounts
  • Will work on up to 5” lift

Kit Contains (Base Kit)

  • Side Chassis Brace
  • Adjustable Panhard
  • Upper Control Arm Mounts (Diff and Chassis)
  • Lower Control Arm Fixed Pins
  • Lower Control Arm/Shock Mount
  • Coil Tower Bracing
  • Lower Coil Mounts
  • Upper Adjustable Control Arms
  • Lower Control Arms
  • Handbrake Relocation Bracketry
  • All Required Bolts & Fasteners

*When ordering the Base Kit it excludes Coils & Shocks.

Shock Options

  • Nitro Gas Shocks
  • Remote Reservoir

Shocks & Coils are available as a Rear Only or Front & Rear Kit.

NOTE: The welding of this kit must meet or exceed Australian Standard AS 1554 Structural steel welding Category SP. In general, for approval purposes, this part needs to be welded by a qualified welder who has performed and understands the correct welding procedure that is required.

Fitting & engineering costs start from $4695. Call us on (03) 9720 8783 for a comprehensive quote.

Please Note: These will not suit the new 2021 Mazda BT50

The 4WD Shed is an Authorised Stockist for Superior Engineering.

(SE-34442)

The 4WD Shed is an Authorized Stockist for Superior Engineering.

We stock, supply & fit a large range of items that can be found on Superior Engineering BUT in some instances there may be delays in stock or if it is a special order item.

We aim to ship items within 1-3 business days but if your order contains any items that fall under the above conditions we will contact you to notify you. If you wish to check availabilty before purchase you can call us or send an email. 

Due to the weight of Superior products we may be required to quote freight on multiple items. We will contact you before beginning to process your order otherwise you can contact us for a freight estimate. We will try & keep costs down where we can so this may mean that we split your order over 2 parcels in order to keep weight & costs down.

Please make sure you have a valid contact number in your order details for us to contact you regarding any delays.

SKU SE-34442
Brand Superior Engineering
Shipping Weight 150.0000kg

Others Also Bought



More From This Category