Formula 4x4 F4R 3600kg GVM Upgrade Ford Ranger Next Gen 2022-On

$5,500.00

More info.

Make 4 interest-free payments of $1,375.00



In Stock


Calculate Shipping

Formula 4x4 F4R 3600kg GVM Upgrade Ford Ranger Next Gen 2022-On

GVM Kits purchased from us can only be installed by The 4WD Shed in our Vic workshop. Installation of the GVM suspension upgrade costs start from $1458

After you have purchased this lift kit, someone from our team of suspension experts will contact you to confirm your order details, your requirements, and your vehicle specifications. All to ensure that we give you the right product. If you purchase this lift kit using our click & fit service, we will confirm your installation date at the same time.

GVM Kits will only be shipped directly to our certified dealers and can only be installed by an authorised and approved Fulcrum Suspension Workshop.

High Level Product Details
  • Pre-set at 40mm front height
  • Preload Adjustable Spring to adjust Vehicle Height
  • 3 way Adjustable Remote Reservoir Front Damper
  • 2 way Adjustable Remote Reservoir Rear Damper
  • 22 Compression & 23 Rebound Settings Front
  • 25 Compression & 18 Rebound Settings Rear
  • Heavy Duty 22mm Damper Shaft 
  • 58mm Custom Design Piston for better flow
  • Mono Shock Design with Remote Reservoir 
  • Polyelast Front Shock Bottom Mount & Pillow Ball Top Mount
  • SuperPro Top & Bottom Shock Bushes Rear (Lifetime warranty)
  • Custom Brackets for Front Reservoir Mount
  • Unlimited Kilometer warranty. Just activate your warranty online.

Formula F4R Remote Res Shock - Adjustable GVM Upgrade Kit

Designed specifically for the Ford Ranger PY and benchmarked against the industries best. This Formula F4R Remote  Reservoir lift kit, offer the best performance and the most comfortable ride onroad and offroad, bar none. 

  • An ultra-adjustable remote reservoir shock, valved to maximise comfort & performance in all types of terrain.
  • Improved Cavitation resistance, giving greater driving consistency on the roughest roads and toughest tracks.
  • Built tough with a 7075 aviation aluminium body, massive bore, custom piston & light 6061-T6 aluminium supports.
  • Designed to provide sharp handling on and off road, whilst giving an extremely comfortable ride.
  • Precisely calibrated, with vehicle specific damping and a large custom piston to control performance + comfort.
  • Increased oil volume and thermal capacity, providing consistent and dependable performance.
  • The F4R damper adjustment range is designed to accommodate a variety of springs, loads & heights.
  • Fully Customisable & Rebuildable

The Formula F4R lift kit for PY is a 3-way adjustable remote reservoir coil-over system in the front and a 2-way adjustable remote reservoir shock in the rear, specifically designed to suit your vehicle. The damper uses Fulcrums own high flow digressive piston with carefully chosen shim stacks to create the best damping characteristics for each vehicle.

The front damper is 3-way adjustable, spring pre-load, compression bypass and rebound bypass. The rear damper is 2-way adjustable, compression bypass and rebound bypass. 

The adjustment clickers allow the user to carefully control how much oil is allowed to bypass the shim stacks in each direction. Opening the clickers allows more oil to bypass, reducing the damping effort in either compression or rebound. This allows tuning for different load scenarios and road conditions.

This Formula F4R Adjustable Remote Reservoir Kit is pre-set to:

  • Front: 40mm
  • Rear: 40mm

Vehicle Compatibility

  • Ford Ranger Next Gen PY P703 2022-On

Applicable Variants: XL, XLS, XLT. Platinum, Wildtrack - All 4x4

*Excludes Raptor Models

Kit contains: Formula F4R 91004 x 1, 92004 x 1, Formula Leaf Springs FLS-155 x 2, U-Bolts FUB-005 x 4, SuperPro Shackle, Pin & Bush Kit KIT168SK x 1, Centre Bearing Alignment Kit TRC0048 x 1, SPF4848K x 1, Tyre Placards PX4PLACARD x 1, Load Capacity Label PX4LOADCL x 1, Cat 6 Indicators 77ACM2-GVM-IND x 1

Upgrade Specifications

  • GVM Upgrade Limit: 3600kg (OE Spec 3250kg)
  • Front Axle Limit: 1522kg (OE Spec 1450kg)
  • Rear Axle Limit: 2078kg (OE Spec 1959kg)

Due to NB1 category change, CAT 6 side indicators are required.

Control Arm Upgrade

We recommend adding an aftermarket control arm upgrade (TRC6750 Alloy OEM Steering Knuckle or TRC6751 Steel OEM Steering Knuckle) to correct alignment on lifted vehicles. This is available at additional cost.

Features

  • GVM Increase to 3600kg
  • No GCM increase. 
  • Includes aftermarket upper control arm kit TRC6560 to correct geometry. 
  • Includes Low Pressure Nitrogen for fade free Big Bore shocks
  • Designed and built for Australian conditions
  • Tested fitted and supported by 4WD 24/7
  • Specifically designed for each application and vehicle performance
  • The most comfortable GVM Kit on the market
  • Big Bore shock design for improved heat dissipation, giving longer performance. 
  • Tapered pegs on Front Struts for increased strength
  • Unlimited Kilometre warranty. Just activate your warranty online.

All GVM Upgrade Kits are supplied with appropriate documentation and can only be fitted by an authorised and approved Fulcrum Workshop.

Prices listed are for the GVM Suspension kit only, please contact us for fitting & engineering costs.

Formula 4x4 Warranty

Formula 4x4 GVM kits come with a 5 year / Unlimited Kilometre warranty. Just activate your warranty online. Learn more here.

The 4WD Shed is an Authorised Stockist & Installation Facility for Formula 4x4 GVM Upgrade kits.

 

ENGINEERING IN VICTORIA
Post-Rego
When purchasing this GVM kit, as per state legislation, vehicle engineering is required. This is completed by an engineer who signs off on the installation of the GVM upgrade kit and then provides a mod plate for your vehicle. For post-rego vehicles (vehicles that are already registered) there is an additional cost for this as the data for your already registered vehicle needs to be changed and a new mod plate needs to be assigned to the already registered vehicle. If you have modifications to your vehicle, then these may be inspected & additional codes may be applied, leading to adjusted costs.
 
Pricing for Engineering starts from $1150
 
Pre-Rego
For pre-rego vehicles (before the vehicle is first ever registered) the GVM upgrade is applied & the ROVER database is updated. There is no charge for this service, as an external engineer is not required to inspect the vehicle. Approvals are done all in-house at The 4WD Shed in conjunction with Fulcrum Suspension.

(RANG-PX4GVM-F4R)

SKU RANG-PX4GVM-F4R
Brand Formula 4x4
Shipping Weight 100.0000kg

More From This Category