Part-time 4WD conversion kit - Landcruiser 100/105 Series
To suit HF2A full-time transfer case:
100 series LandCruiser IFS
105 series LandCruiser live axle
This is a heavy duty part time 4WD conversion kit for the 100 series HF2A full time 4WD transfer case as fitted to all RV, GXL, and Sahara LandCruisers manufactured from 1998 on.
This kit is supplied with Heavy Duty Free Wheel Hubs. The hubs are fitted with a heat treated carbon steel drive ring. The drive ring in the standard version is made from a cast steel and for this reason is the weakest part of these hubs. Vehicles fitted with front diff locks have been known to break the standard AVM free wheeling hub. The new heavy duty hubs have been designed to strengthen this weak point in the drive line when diff locks are used.
Centre diff spool
Heavy duty free wheel hubs
Installation Instructions are available online as a PDF File. Click here
IF YOU REQUIRE THE KIT WITH THE BEARING & ALREADY PRESSED CLICK HERE
100 Free Wheeling Hubs
The 100 series full time 4wd front axle splines are larger than the part time 4wd 100 series and the previous 80 series model Land Cruisers, for this reason we have remanufactured the AVM free wheeling hubs to suit.
ABS Live Axle Models
When ABS equipped live axle vehicles are fitted with a Part Time 4WD kit, the ABS sensor reading from the CV joint becomes inoperable and the ABS warning light is displayed on the dash. The ABS relocation kit moves the sensor from the CV joint to the wheel hub and operates as per factory specifications.
ABS 100 Series IFS Models
If your vehicle has IFS (Independent Front Suspension) and is fitted with ABS brakes, the Part Time 4WDkit can be fitted without effecting the ABS system. The reason for this is because the ABS speed sensor is reading off the wheel hub.
Viscous Centre Diffs
Vehicles fitted with viscous coupled centre diffs can still use our Part Time 4WD kit. To complete the installation, you will be required to purchase the 'Centre Diff Lock' button as used on the GXL models. The switch is an easy plug and play with the necessary plug & wiring already provided in the Toyota wiring loom.
The prototype conversion was first fitted to our 6.5 Chevy diesel 80 series in September 1999.
The conversion gave the vehicle a new lease of life with improved handling, better acceleration, and lighter steering. The steering no longer has a tendency to pull hard when powering out of a corner, this must add up to less wear and tear on the steering components such as the tie rod ends and steering box. The steering has also become more direct or positive. The acceleration improved due to the reduction in losses associated with driving the front differential, drive shaft, and CV joints. With these components no longer being driven, a considerable increase in their service life can also be expected.
|Brand||Marks 4WD Adaptors|