Upper Control Arm Lift Correction Kit Mitsubishi Triton MQ MR

SuperPro Control Arm Upper Complete Assembly - TRC501

There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms. Left and Right Arms for Lifted Vehicles with Caster and Camber Correction Headlight sensor bracket on RH Arm

Product Specifications:

• Components Per Product: 2ARMS

Vehicle Application Information:

• Based on a standard 2" lift - Approx 2 degrees of caster and approx an extra 1.5 degrees of camber

Suits Vehicles with Headlight Sensor.

Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement.

Droop Stop included.

• Fitting Time [min.]: 180
• Fitting Position: Front
• Axle alignment required after fitting
• Fitting Difficulty: difficult

When you get a lift kit installed, you deserve the best. Why do half the job correcting your wheel alignment with a control arm that only offers static caster correction? Get the job done properly with SuperPros fully adjustable 4x4 control arms! Our arms come with complete camber and caster control. Designed to give your 4WD the best wheel alignment settings and increased clearance.

The modern trend to fit accessories, larger tyres, rims and suspension lift kits to the modern 4 X 4 has exposed the lack of Camber and, particularly, Caster Adjustment required to return the suspension geometry to OEM settings.

This leads to undesirable handling and driveability issues such as wandering all over the road, uneven and premature tyre wear, along with the steering wheel vibrations. SuperPro Roll Control Arms are manufactured from a hybrid of high stress, cold formed steel tube and forged steel, with an adjustable position Ball Joint and are fitted with SuperPro bushes