Hayman Reese 3000kg Towbar GWM Great Wall Motors Tank 300 10/2022-On

Hayman Reese 3000kg Towbar GWM Great Wall Motors Tank 300 10/2022-On

Suits all Tank 300 variants. Maximum tow rating dependent on vehicle.

With a tow capacity of 3000kg and a ball weight of 300kg this towbar is specifically designed for towing caravans, large trailers, boats or horse floats. This towbar has a concealed design and requires a bumper cut. The towbar has a removable Towball Mount (TBM) with 50mm towball, rated D-shackles, Smartcode technology and Smart Pin all included.

• Maximum Towing Braked: 3000 kg
• Towing Unbraked: 750 kg
• Tail Harness Length Required: 04943 (Not included)
• Maximum Static Ball Load: 300 kg
• RPA Disable Required: YES

Please Note: Bumper Cut is required to fit this unit.

Due to the large number of products in the Hayman Reese range, we cannot keep everything in stock at our retail store. Please contact us to check availability, as we may need to order in from the warehouse.

All Hayman Reese products can be fitted at The 4WD Shed. Additional costs may apply.

WARNING: Do not, drill, cut, weld or otherwise modify the towbar.

FOR TOWING PURPOSES ONLY - This towbar is designed and tested by Hayman Reese to adhere to ADR 62/02 which provides only for the expected load demands of towing.

TOWBAR MAINTENANCE AND CARE:
1. Hayman Reese recommend that the towbar LUG or TBM (tow ball Mount) Pull Pin and R-clip are removed and stored when not in use. Removal of LUG or TBM (tow ball mount) is advisable when not in use to assist with any of the following.
• Ensure rear number plate is not obscured.
• Allow maximum available departure angle and prevent any potential interference.
• Prevent possible interference with vehicles reverse sensors or camera detecting a tow ball mount as an obstruction during reversing.
• Removes towball mount as an obstruction for when moving around the rear of the vehicle.
2. Hayman Reese recommends routine inspection of your towbar to ensure trouble free towing.
• Bolt security and tension should be regularly inspected and checked for correct tension. Replace any worn or defective parts with suitable grade & class fasteners. Inspection should be requested to coincide with vehicle major services.
3. It is the owner’s responsibility to ensure towing and down ball weight capacities of the towing vehicle are
not exceeded.
• Towing and down ball weights allowable may differ according to model variations. Please refer to owner’s manual or vehicle dealer to confirm exact rating for your vehicle model variant.
• It is not uncommon for the vehicle tow rating to differ from the towbar rating. When this occurs, the lesser rating must be adhered to.
• For vehicles fitted with enhanced vehicle functions that may be altered/changed when towing i.e Trailer sway mitigation, blind spot detection, adaptive cruise control etc. Please consult owner’s manual to understand changes enabled when towing and after towing.