Impressor Incab Digital Kit - 3 Button

Impressor Incab Digital Kit - 3 Button

Take full control of your Load Assist airbag system without leaving the driver’s seat. The Boss Air Suspension Impressor Digital In-Cab 3 Button controller is designed to give you simple, adjustment of your rear airbags at the touch of a button with an Air Tank that is always full of air ready to inflate tyres, activate an Air Locker or any other use.

Whether you’re towing, carrying tools, or managing uneven loads, this system allows you to fine-tune your ride height instantly for improved stability, comfort and vehicle balance.

Simple, Effective Control

The intuitive 3-button layout makes operation straightforward:

• Up Button: Inflates both airbags simultaneously to raise the rear of the vehicle.
• Left Button: Deflates the left airbag independently.
• Right Button: Deflates the right airbag independently.

This independent side-to-side control is ideal when carrying uneven loads, such as a toolbox, canopy fit-out or water tank mounted on one side. With the ability to adjust each airbag individually, you can level the vehicle quickly and maintain proper ride height and handling.

Designed for Real-World Use

The Impressor Digital 3 Button controller is built for drivers who demand practical functionality and reliability. It provides:

• Fast in-cab airbag adjustment
• Improved load levelling capability
• Greater control when towing or carrying heavy loads
• On board air for any application

For customers wanting a more advanced onboard air solution, the full Impressor System adds an air tank and automatic compressor control, ensuring stored air is always available for rapid inflation and additional applications such as tyre inflation and air lockers.

The Impressor Digital In-Cab 3 Button controller is the ideal solution for straightforward, reliable airbag management — giving you total control over your suspension setup whenever conditions change.

About Boss Alloy Air Tanks

Boss Manufactures lightweight T6 heat treated aluminium air tanks, with a range of tank sizes, port configurations and port sizes.

Furthermore, our tanks are rust free, providing clean air for valves. Also all 9L (3 gallon) tanks can be mounted in 3 angles. On end, upright or upside down and still keep drain port at bottom with our unique design. Mounting legs included. Shot based anodised or chrome finish.

Also, recommended working pressure is 0 - 170psi. While maximum pressure is 400psi. 

Features

1 Piece Non Rust Aluminium

No join extruded centre for improved safety. Providing Clean air for valving & fittings.

Ports

1/4"NPT Port

Adjustable Mounting Legs

Ability to mount in endless configurations, spin the barrel so the drain valve is always facing the bottom, adjust the width to fit different mounting points!

Quality Finish

Shot Blasted, Anodised & T6 Heat Treated

Ports

3/8"NPT Port

Adjustable Mounting Legs

Ability to mount in endless configurations, spin the barrel so the drain valve is always facing the bottom, adjust the width to fit different mounting points!

Size of the Alloy Tank.

Tank Size is L450mm x H220mm x W180mm

Boss Compressor

BOSS Air Suspensions 12v air compressors are the industry leader.

We designed and began manufacturing our range of air compressors after trying many other brands only to be let down time and time again. Performance of other brand compressors are sometimes impressive, however they wear out quickly and take longer and longer to recover your air needs, that's if they re-start under load!

Other popular 12 volt air compressors just don't stack up to the BIG BOSS compressor. Make sure the alternator is up to the task because the bigger the compressor the more amps it will need! BOSS 12V air compressors do not require oil!

The designs are quick and easy to mount. Engine driven compressors available upon request, brackets are up to the installer.

BOSS Air Compressors use the latest technology to deliver compressors that perform tirelessly for many years of service.

12v 100% duty cycle, ideal for air suspension use. Oil less compressor can be mounted vertical or horizontal for easy installation

•     PX-06 Compressor
•     Duty Cycle 100%@100psi
•     Max working pressure 200psi
•     1.8cfm
•     Amp draw Max 23amps
•     Check Valve
•     Braided Hose
•     IP 56 Rated

Mounting sizes are 85mm centres wide and 225mm centres long

Please Note: Though we keep the popular movers in stock ready to supply & fit, we may need to order in some product lines as required. If you require shipping, we may ship directly from the warehouse to expedite your order. If you require pick up from us in Bayswater, Victoria, please contact us for an ETA.