Adjustable Panhard Rod with Polyurethane Bushing - Rear - Toyota Hilux 130 Series

suits 2WD/4WD

$265.00

More info.

Make 4 interest-free payments of $66.25



In Stock


Calculate Shipping



1 x Adjustable Panhard Rod with Polyurethane Bushing - Rear - Toyota Hilux 130 Series delivered to , AU


Collect from our Bayswater VIC Store - $0.00
We will call when item is ready for Pick Up

Adjustable Panhard Rod - Rear with Polyurethane Bushings

Suits

  • Toyota Hilux / 4Runner 130 Series 2wd/4wd LN130, RN130, VZN130, YN130

Please Note: Check that your current rod has a brake bias bracket on it. If you need the rod without the bracket you will need the APR014

Roadsafe Adjustable Panhard Rods are now available with Polyurethane bushings. Some customers prefer the longevity of the poly for these panhard applications. Many advantages can be found in urethane, over rubber. In the panhard application the poly bushings offer for greater load deflection, higher load bearing capacity, low compression set & greater tear strength.

An absolute necessity on all raised 4WDs is the Adjustable Panhard Rod. Designed to correct axle alignment, the fitment of an Adjustable Panhard rod eliminates potential contact between tyre & body & improves handling issues on vehicles lifted 2" & above.

All Roadsafe Adjustable Panhard Rods are heavy duty, single thread off car adjustable & come complete with bushings & steering damper mounting brackets where applicable.

Roadsafe Urethane bushings are the same dimensions as the factory original, so all rods are manufactured to factory bush specifications. Bushing replacement if required is easy, just use the factory original or aftermarket.

Design changes over time have seen the implementation of double nuts for extra security, 150mm of adjustment to suit 2-6" lifts & fine 2.0mm pitch thread for finer adjustability.
Roadsafe 4WDs Adjustable Panhard Rods are one of the few on the market that are manufactured from solid bar as standard, as well as boasting an increase in the outside diameter. It's only a matter of time for any vehicle that is used for serious off-road work that the factory panhard will break or bend. This will cause the body of the vehicle to move uncontrolled off centre to the chassis, damaging fuel filler lines, steering linkages & much more!

Location Bushing OD (mm) Wall Thickness
Rear URETHANE 27 Solid

The 4WD Shed is an Authorised Stockist of Roadsafe 4WD.

(APR006)

SKU APR006
Brand RoadSafe 4WD
Shipping Weight 8.0000kg

More From This Category