Bilstein Performance Lift Kit - Volkswagen Amarok
Bilstein Performance Lift Kit designed to lift the vehicle 25mm and provide the ultimate in handling and control, both on and off road.
**Important Note** The Front Drive Shafts need to be removed to fit the front shock absorbers in this kit. VW have designed the driveshaft bolts to be for one use only, and they need to be replaced, then torqued to the following settings:Outer CV Bolt 150Nm + 180 Degrees Inner CV Bolts 50Nm + 90 Degrees. The Part No. is TRC033 (x2) and they are not supplied with this kit
Fulcrum Lift Kit Warranty
All Fulcrum lift kits are covered by a 12 month / 20,000km standard warranty.
Lift Kit Fitting Instructions
All lift kits are shipped with a set of lift kit fitting instructions and also include details on upgrading your warranty. The instructions provided are general in nature. It is highly recommended that you get your lift kit installed by a mechanic or suspension technician, preferably with wheel alignment facilities.
- BILSTEIN gas-pressure technology provides maximum traction, precise handling and safety
- Patented digressive valving instantly reacts to changing surface conditions
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Proven in harsh Australian outback conditions
- Repairable & Revalveable
- OEM certified mounting hardware allows for easy installation
- Restores original ride characteristic
- Individually fine-tuned during BILSTEIN road testing
- Enhanced safety
- Precision handling for optimized vehicle control
- Constant damping power under any load
- 3 year 60,000km warranty
- Volkswagen Amarok 2011-On
Matching spring rates with your vehicle weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you should get, please let us know & we can discuss this with you.
Product Note: This kit's default rear spring, has been specifically designed for use on vehicles that have a constant load of 0-300kg. Please specify if you need different spring rates.
ShippingShipping Note: Flat Rate Shipping covers most metro areas in Australia. However extra freight charges may apply if residential or in a remote or regional area. We will contact you to advise if this applies to your order.
These kits are Made to Order (MTO) please call us to confirm kit availability to avoid delays.
The 4WD Shed is an Authorised Stockist & Fitter of Fulcrum 4x4 Lift kits.
Click & Fit Information
Installation includes full product installation by a qualified suspension technician, a full wheel alignment, a complete suspension check & a brake inspection. We also offer a complimentary 1000km check-up service for free, which includes all safety checks, a wheel alignment if required and any retention work. We offer this service to ensure you get the best possible experience.
Additional costs may apply if we are completing additional work at the same time, this can include but not limited to winch installation, lights, mechanical, new wheels & tyres etc. Pricing will be discussed for any additional work being carried out.