Roadsafe Rear Tow Standard Length Alloy Hitch 5T - BLUE
Roadsafe 4WD Recovery Hitch range include these Standard Length Rear Tow Points. Suited to most vehicles with a 50x50mm hitch receiver on the vehicles towbar.
Available in a range of colours, these 50mm recovery hitches in aluminium with WLL 5000kgs are designed & tested in the toughest conditions. All Roadsafe 4WD tow point & hitch designs are destruction tested during development to ensure they are rated at a level they can withstand.
The new alloy hitch destruction testing was halted at 16 tonne due to test equipment limitations NOT these hitch limitations, with no signs of deformation within the hitch at this force.
Featuring Multi Hole for mounting the hitch either vertical or horizontal depending on your recovery needs.
- Multi Holes for either vertical or horizontal mounting
- Fits ARB Rear Bars
- Fits most 50mm receivers
- Light weight
- Rated to 5000kg
Recommended for use with a 4.7t Bow Shackle (Not included)
See below if you wish to purchase the Full Kit
This is for the Blue Hitch if you wish to purchase another colour please click the links above
The 4WD Shed is an Authorised Roadsafe 4wd Stockist
Always INSPECT the Tow Points and shackles before each use. Do not use if there are visible signs of damage or wear (including cracking or elongation). Do not exceed the Working Load Limit (WLL) of the shackle or Tow Points. Always STAY A SAFE DISTANCE away from the recovery area – at least 1.5 times the length of the recovery strap. Incorrect use of recovery equipment can result in serious injury or death.
Always ensure that adequate PREPARATION for the recovery, to minimise the strain on either vehicle, has been undertaken i.e. Digging, Rock placement etc. If you do not understand how to use this equipment safely or are uncomfortable with your abilities in the use of recovery equipment, please complete a course that specialises in four wheel driving & 4WD vehicle recovery.