Seat Adapter Kit to suit 60 Series Toyota Landcruiser
Please Note: The kit varies depending on your current set-up whether that be double bucket or bucket/bench factory combinations. Please be sure to order the correct kit for your current combination noting that Sahara rails are not compatible, if you have a Sahara you will also need to locate standard GXL sliding rails from a factory 60 series seat.
The Huracan Fabrication Seat Adaptor Kit to suit 60 Series Toyota Landcruiser is compatible with any BA, BF, FG or FGX Ford Falcon seat.
The 60 Series kit will do both the front seats. Available by request for Single seats only.
The plates are installed on top of your existing Toyota sliders and provide new mounting points to install the seats into. By removing the Ford/Holden rails you do not need to worry about any of the electrics that come with the seat. Lumbar support and back angle adjustment is all managed via manual dials on the side of the seat.
Each kit comes with everything you need to convert both front seats except the seats themselves. The whole job takes about 1 hour or so of your time to complete.
The 4WD Shed can supply & fit all our products. Need seats? Give us a call, we can get in seats by request. Not local? We suggest sourcing your seats from Ebay, Gumtree, Facebook or at your local wreckers.
Please note: By purchasing this kit you accept all responsibility for the modification made to your car. We can only endorse this kit for off-road/private use until you have had it approved by your local roads authority or automotive engineer. Seats shown in the ad are for demonstrations purposes only and are not included in the sale.
Do I need to get a mod plate?
Yes. Any seat swap for a vehicle that did not ship with a particular seat from factory will require a mod plate.We advise speaking with your local engineer prior to purchasing to ensure they can sign off on this modification for you. We can assist you with this if you are local to us.
Shipping & Availabilty
Most kits are sent out next business day after ordering. Some kits however, such as tailgate storage mods and 100 series/GU Patrol require significant preparation and can be a couple days or even up to a week before being shipped. If time is critical please contact us for an accurate shipping estimate.
Warranty on my items.
We guarantee the structural integrity of the steel used in our seat adapter kits for the life of the vehicle. For other items, such as tailgate storage and bush armour we provide a 24 months warranty against manufacturing defects EG. defective rivets, welds or laminating etc.
The Ford/Holden seat I purchased came with electric rails. Do I need to wire these in?
No, any electrics in the rails will be removed as a part of this modification so there is no need to wire them in. The only exception is for premium model seats such as some FPV/HSV or Luxury models where lumbar support and back rest angle are electric. If you purchase these seats you will need to wire them up yourself.