Analogue In Cab Control for Onboard Air Kits

In Cab Control unit for vehicles fitted with an onboard air system as well as Load Assist Kits.

This system will allow control of your Load Assist kit from within the cab utilising your existing air tank/ compressor system.

The independent left and right 'Dump Valves' allow you to release air pressure from each airbag separately. This feature provides better control over the vehicle's level and stability, especially when adjusting for uneven loads or terrain.

The components in the In Cab Control kit are rated for up to 200 PSI, ensuring they can handle the demands of most Load Assist applications.

Comes with the following

• 10mtrs J844 DOT certified air line
• 1 x “Y” Check Valve
• 2 “Y” connectors
• 4 “T” connectors
• 200PSI BOSS Dual Needle Gauge
• Independent Left & Right “Dump Valves”
•  Polished Aluminium Panel
• 5 x 1/4″ push fittings
• Momentary 12v Switch for actuating the Valve
• Mini 12v Electric Solenoid/Valve
• Fitting Instructions

Note: This kit does not come with a Compressor or Tank.

This kit is specifically designed for vehicles fitted with an onboard air system and Load Assist kits. It is not universally compatible with all air suspension systems, so ensure your setup aligns with the kit's requirements.

The In Cab Control unit allows you to manage your Load Assist kit directly from the vehicle's cab. It utilises your existing air tank and compressor system, providing convenience and ease of use when adjusting airbag pressure.

Professional installation is recommended to ensure proper setup and functionality, particularly if you are unfamiliar with air suspension systems.