Wireless Remote Airbag Inflation Kit includes PX01 Compressor & Digital Gauge

This Wireless Remote kit is used to control Boss Load Assist Kits or airbag suspension from inside or outside your cab without the need switches installed in the cab.

Comes with A Dual 52mm Digital Gauge with Pressure sensors and 5M loom. (Note no panel supplied for gauge mounting)

Simple installation with control of airbags UP and down using our PX01 compressor. Comes with 4 channel remote controller.

Operation - Depress either up button to even up and inflate both bags together, depress Left down button to deflate Left bag and Right down button to deflate Right bag.

Kit includes

•  
• 1 x PX-01 12V BOSS Air Compressor
• 1x 4 channel remote controller
• Dual Digital gauge with senders and 5M loom
• 2 x 4 button remote controls
• 2 x Boss Mini 12v air valves with fittings
• 5 meters of 1/4” J844 DOT Airbrake line
• 1 x 1/4” push connect Y check valve
• 4 x T Connectors
• 10 x Cable Ties
• 1 x tube sealant
• Instruction Sheet

This kit is specifically designed for use with Boss Load Assist Kits and airbag suspension systems. It is not universally compatible with all brands of airbags, so ensure you are using it with Boss products for optimal performance.

The PX01 kit includes a 4-channel remote controller that allows you to control the inflation and deflation of the airbags. Press the up button to inflate both bags simultaneously, or use the left and right down buttons to deflate the individual bags as needed.

The dual 52mm digital gauge included with the PX01 kit provides precise pressure readings for each airbag, allowing you to monitor and adjust the air pressure accurately. This helps ensure optimal performance and stability of your vehicle while towing or carrying loads.

The PX01 kit is designed for simple installation. It comes with all necessary components, including a 5-meter loom for the digital gauge, and clear instructions to guide you through the setup process. However, some mechanical knowledge is recommended for best results.

The kit includes 5 meters of 1/4� J844 DOT airbrake line, which is suitable for use with the air management system. This durable line is designed to withstand the pressures associated with airbag inflation and deflation.

Professional installation is recommended to ensure proper setup and functionality, particularly if you are unfamiliar with air suspension systems.